ThermaGuard Enclosures


Terrapin’s patented ThermaGuard modular design significantly simplifies the installations of rigid enclosures with a modular installation process. Enclosures can be installed as a pre-assembled enclosure or  piecemeal around an existing instrument without taking the instrument offline. By providing an alignment manifold with pre-set holes for power wiring, control wiring, and process tubes, this allows for a complete installation in the field inclusive of process tubing, electrical, block heaters, calibration and testing without the need of offsite integration and schedule breaks.


ThermaGuard Advantages

  • Allows instruments & bundle to be installed ahead of the enclosure.
  • Can be installed before or after the instrument & tubing bundle.
  • Parts can be individually replaced.
  • Can be installed all at once or in stages.
  • Pre-Engineered Holes for conduit &tubing bundles simplify installation.
  • Enclosure can be installed around the instrument allowing for greater access to the instrument & tubing.
  • Optional, removable insulation in 1″(2.54cm) Polyisocyanurate or 10 -20mm Pyrogel.
  • The insulated box (with ThermaGuard Heated Liner) can maintain > 75°F/23.9°C in a -60°F/-51.1°C temperature environment


ThermaGuard Enclosure Specifications

Outer Dimensions H x W x L23.58” x 18.75” x 23.61”
59.89cm x 47.62cm x 59.96cm
Inner Dimensions H x W x L21.95” x 17.92” x 23.08”
55.75cm x 45.51cm x 58.62cm
Material ThicknessApprox ¼” (0.635cm)
Material TypeASA Plastic w/ glass reinforcement
Protection StandardIP 66
Temperature Rating> 75°F/23.9°C in -60°F/-51.1°C environment (with ThermaGuard Heated Liner)
Gasket MaterialNeoprene gaskets
ColorLight grey
Approx. Weight19.4 lbs (8.8 Kg)
Pipe Stand Mount Sizesch 40 2” pipe dia (2.375”)
sch 40 5.08cm pip dia (6.03cm)
Lip Support(1) Stainless steel lid support
Hinges(2) Stainless steel hinges
Latches(2) Stainless steel latches
HardwareAll stainless steel hardware

Outer Dimensions H x W x L23.58” x 18.75” x 23.61”
59.89cm x 47.62cm x 59.96cm
Inner Dimensions H x W x L21.95” x 17.92” x 23.08”
55.75cm x 45.51cm x 58.62cm
Material ThicknessApprox ¼” (0.635cm)
Material TypeASA Plastic w/ glass reinforcement
Protection StandardIP 66
Temperature Rating> 75°F/23.9°C in -60°F/-51.1°C environment (with ThermaGuard Heated Liner)
Gasket MaterialNeoprene gaskets
ColorLight grey
Approx. Weight15.8 lbs (7.167 Kg)
Pipe Stand Mount Sizesch 40 2” pipe dia (2.375”)
sch 40 5.08cm pip dia (6.03cm)
Lip Support(1) Stainless steel lid support
Hinges(2) Stainless steel hinges
Latches(2) Stainless steel latches
HardwareAll stainless steel hardware

Download Enclosure Spec Sheet

 

 

 

 

 

 

 



Versatility & Standardized Assembly

Once the ThermaGuard enclosure manifold is fitted to the pip stand it provides standardized ports for installation of conduit and tubing bundle. The ThermaGuard manifold is a quick connect design that aims to reduce the total install time and cost by 30%. Every ThermaGuard install has a consistent conduit and bundle alignment allowing for a standardized enclosure installation for all projects.


Accessories Available

  • 1″(2.54cm) Polyisocyanurate or 10 -20mm Pyrogel Insulation
  • 100W Heater with mounting bracket
  • Thermostat with preset temperatures
  • 2” (5.08cm) instrument stand that comes in single, or dual configuration
  • Pipe stands available in hot-dip galvanized, painted galvanized, or fiberglass
  • Universal mounting bracket for single or dual instrument installations

Removable Insulation (Optional)

Therma Guard removable insulation includes a lined shell to provide extra protection and increased efficiency. It is made from a hard yet lightweight polyisocyanurate foam to conserve heat loss. The 2-piece removable design allows insulation to be installed or replaced at any time. ­­The insulation has a K Factor of .159 BTU (IT) inch/hour/foot²/Fahrenheit. With the arctic insulation and Terrapin heater, the ThermaGuard Enclosure can maintain 40°F(4.4°C) in -60°F(-51.1°C) temperatures.